There are now a large number of different means for getting rid of moles. To prevent pests from interfering with the area, traps are placed in their holes, tampons are placed in the passages, which are soaked in ammonia.

They also place plastic bottles in which rotten eggs are placed, or fill the passages with water.

I want to tell you about one working method that helps to get rid of moles.

My neighbor, who no longer has these pests on his property, told me about it.

Everyone knows that no living creature on our planet can survive without oxygen. To get a mole out of its hole, you need to cut off its access to oxygen. How can this be done?

To do this, you need to take a flexible wide pipe, a regular garden hose with a diameter of at least 32 mm will do.

The neighbor used a corrugated pipe with a diameter of 50 mm, which is intended for installing electrical wiring underground.

One end must be inserted into the animal’s hole.

Other holes found on the site need to be compacted a little. This can be done simply with your foot.

And the other end should be connected to the exhaust pipe of the car. If there is no car, then you can use any other source of exhaust gases, for example, a gasoline generator, lawn mower, etc.

Anything that runs on an internal combustion engine will do.

Next, start the car and wait for about half an hour, all the mole passages should be filled with exhaust gases. I want to note that these passages can be 100 meters or more.

After 25030 minutes, the pests began to crawl out of their holes, not only on the neighbor’s plot, but also on all nearby plots. Then I went to the neighbor to explain the situation, and he told me about this method.

After the moles come out from under the ground, you need to catch them using any method convenient for you. I took all the animals to a field located 30 km from my dacha and released them there.