Adjusting door hinges using a bottle is a practical and simple trick. Here’s a step-by-step guide:
- Identify the problem : If the door doesn’t close properly or rubs against the frame, the hinges probably need adjusting.
- Get a bottle : Use an empty plastic bottle (water, soda, etc.). It must be rigid to support the weight of the door.
- Raise the door : If the door is rubbing, place the bottle under the door where the problem is. This will help raise the door and align it better with the frame.
- Adjust the hinges : With the door in the raised position, check the hinge screws. Use a screwdriver to tighten them. If any hinge is very loose, you may need to replace it.
- Test the door : Remove the bottle and test the door to see if it now closes properly and does not rub.
- Repeat if necessary : If problems persist, readjust or place the bottle in different positions to raise the door further as needed.
This method is temporary, so if the problem persists, it might be a good idea to consult a professional or consider a more permanent solution. Good luck!